https://wiki.osdev.org/Bare_Bones + my Makefile and .gitignore

1 files changed, 109 insertions, 0 deletions

diff --git a/boot.s b/boot.s
new file mode 100644
index 0000000..172fd14
--- /dev/null
+++ b/boot.s
@@ -0,0 +1,109 @@
+/* Declare constants for the multiboot header. */
+.set ALIGN,    1<<0             /* align loaded modules on page boundaries */
+.set MEMINFO,  1<<1             /* provide memory map */
+.set FLAGS,    ALIGN | MEMINFO  /* this is the Multiboot 'flag' field */
+.set MAGIC,    0x1BADB002       /* 'magic number' lets bootloader find the header */
+.set CHECKSUM, -(MAGIC + FLAGS) /* checksum of above, to prove we are multiboot */
+ 
+/* 
+Declare a multiboot header that marks the program as a kernel. These are magic
+values that are documented in the multiboot standard. The bootloader will
+search for this signature in the first 8 KiB of the kernel file, aligned at a
+32-bit boundary. The signature is in its own section so the header can be
+forced to be within the first 8 KiB of the kernel file.
+*/
+.section .multiboot
+.align 4
+.long MAGIC
+.long FLAGS
+.long CHECKSUM
+ 
+/*
+The multiboot standard does not define the value of the stack pointer register
+(esp) and it is up to the kernel to provide a stack. This allocates room for a
+small stack by creating a symbol at the bottom of it, then allocating 16384
+bytes for it, and finally creating a symbol at the top. The stack grows
+downwards on x86. The stack is in its own section so it can be marked nobits,
+which means the kernel file is smaller because it does not contain an
+uninitialized stack. The stack on x86 must be 16-byte aligned according to the
+System V ABI standard and de-facto extensions. The compiler will assume the
+stack is properly aligned and failure to align the stack will result in
+undefined behavior.
+*/
+.section .bss
+.align 16
+stack_bottom:
+.skip 16384 # 16 KiB
+stack_top:
+ 
+/*
+The linker script specifies _start as the entry point to the kernel and the
+bootloader will jump to this position once the kernel has been loaded. It
+doesn't make sense to return from this function as the bootloader is gone.
+*/
+.section .text
+.global _start
+.type _start, @function
+_start:
+	/*
+	The bootloader has loaded us into 32-bit protected mode on a x86
+	machine. Interrupts are disabled. Paging is disabled. The processor
+	state is as defined in the multiboot standard. The kernel has full
+	control of the CPU. The kernel can only make use of hardware features
+	and any code it provides as part of itself. There's no printf
+	function, unless the kernel provides its own <stdio.h> header and a
+	printf implementation. There are no security restrictions, no
+	safeguards, no debugging mechanisms, only what the kernel provides
+	itself. It has absolute and complete power over the
+	machine.
+	*/
+ 
+	/*
+	To set up a stack, we set the esp register to point to the top of the
+	stack (as it grows downwards on x86 systems). This is necessarily done
+	in assembly as languages such as C cannot function without a stack.
+	*/
+	mov $stack_top, %esp
+ 
+	/*
+	This is a good place to initialize crucial processor state before the
+	high-level kernel is entered. It's best to minimize the early
+	environment where crucial features are offline. Note that the
+	processor is not fully initialized yet: Features such as floating
+	point instuctions and instruction set extensions are not initialized
+	yet. The GDT should be loaded here. Paging should be enabled here.
+	C++ features such as global constructors and exceptions will require
+	runtime support to work as well.
+	*/
+ 
+	/*
+	Enter the high-level kernel. The ABI requires the stack is 16-byte
+	aligned at the time of the call instruction (which afterwards pushes
+	the return pointer of size 4 bytes). The stack was originally 16-byte
+	aligned above and we've pushed a multiple of 16 bytes to the
+	stack since (pushed 0 bytes so far), so the alignment has thus been
+	preserved and the call is well defined.
+	*/
+	call kernel_main
+ 
+	/*
+	If the system has nothing more to do, put the computer into an
+	infinite loop. To do that:
+	1) Disable interrupts with cli (clear interrupt enable in eflags).
+	   They are already disabled by the bootloader, so this is not needed.
+	   Mind that you might later enable interrupts and return from
+	   kernel_main (which is sort of nonsensical to do).
+	2) Wait for the next interrupt to arrive with hlt (halt instruction).
+	   Since they are disabled, this will lock up the computer.
+	3) Jump to the hlt instruction if it ever wakes up due to a
+	   non-maskable interrupt occurring or due to system management mode.
+	*/
+	cli
+1:	hlt
+	jmp 1b
+ 
+/*
+Set the size of the _start symbol to the current location '.' minus its start.
+This is useful when debugging or when you implement call tracing.
+*/
+.size _start, . - _start